One of the essential systems in any home is the plumbing system. When it is working correctly, we do not even think about it. But when something goes wrong, it can be a real headache. We will discuss the ten most common plumbing problems and how a local plumber would fix them. We will also offer advice on avoiding these issues in the first place.

A fully-functional plumbing system is highly beneficial in your commercial building. However, many business owners do not think much of it until an issue arises. If you have installed maintenance access doors in your building, the first step is identifying the problem. Is there a clog somewhere? A leak? No water at all? Once you have already specified the issue, you can start troubleshooting.

How a Local Plumber Starts the Troubleshooting Process

In this article, we will identify and discuss the most common plumbing issues and an effective solution for each. Whether you want to take care of essential maintenance yourself or you are someone dealing with a plumbing emergency, we got you covered!

Drainage Problems

The most common plumbing problem is drainage clogging. People try to flush things down the drain that don’t belong there, such as hair, food scraps, and grease. Over time, these things build up and create a clog.

There are a few ways to fix a clogged drain, such as using a plunger to see if that will dislodge the clog or a plumber’s snake if the plumber doesn’t work. If all these suggestions fail to determine if there is an underlying clog inside the pipes, immediately call your local plumber.

Leaky Faucets

Another common plumbing problem is a leaky faucet. It usually happens because the washer or O-ring inside the faucet is worn out and needs to be changed. To fix this, you’ll need to disassemble the faucet and replace the washer or O-ring. It is a straightforward repair that you can do yourself, but you can always call a professional plumber if you’re not confident in repairing the fixture.

Running Toilets

A running toilet is another typical problem homeowners face because the flapper valve inside the toilet tank is not working. You’ll need to disassemble the toilet tank and replace the flapper valve. Again, this is something that you can probably do yourself if you’re handy, but if not, it’s best to call a professional.

Low Water Pressure

If you have ever turned on any plumbing fixture and got a trickle of water instead of a steady stream, that is due to low pressure. It can be due to a pipe leak or a municipal water supply problem. Otherwise, try adjusting the pressure regulator valve to see if that helps.

No Hot Water

If your heater isn’t working, you will not have any hot water. There must be a problem with the pilot light or the thermostat. If you have a gas water heater, you may be able to fix the problem by relighting the pilot light. However, if you have an electric water heater, it’s best to call a professional.

Water Heater Leaks

If your water heater leaks, it’s time to call a professional. It indicates a severe problem, such as a cracked tank. Trying to fix this yourself is dangerous, but it’s also likely to worsen the situation. So, save yourself the hassle and call a plumber!

Frozen Pipes

Cold weather causes your pipes to freeze. You’ll need to thaw them out before using them again. You can avoid this by ensuring your lines with insulation. However, if your pipes are frozen, you can try thawing them out with a hairdryer or a space heater.

Final Thoughts From a Local Plumber

Hopefully, these tips can help you diagnose and fix some of the most common plumbing problems! Remember, the best way to avoid these problems is to do some essential maintenance on your plumbing system.

Therefore, make sure you check for leaks regularly and have a professional plumber come out to do an inspection every few years. These advanced precautions will save you time, money, and hassle in the long run!