Plumbers deal with clogged drain all the time, but as a homeowner in Henderson, when you observe water beginning to pool at the bottom of your kitchen sink, you know you are in trouble.

Dealing with clogged drains in pipes is one of the worst nightmares. Whenever you observe the water in your kitchen’s sink, tub, or shower draining very slowly, it is best to take it seriously. Ignoring the residue buildup in the drain can create a nasty mess for you.

Clogged drains may become an obstacle in your daily home chores. To save time and money, you can handle the problem yourself. By following these simple steps, you will be able to unclog a drain successfully.

Step 1: Cleaning the Strainer

You can begin the drain unclogging process by removing the strainer and cleaning it. There are two ways to do that; you can twist it off or unscrew it. After you have removed the strainer, you may clean it and remove any residues that are building around it. In some cases; you will be able to unclog the drain in this step.

Step 2: Use Handy Plunger

When removing and cleaning the strainer does not work as expected, the next step is to make use of a handy plunger. To start the plunging process, stuff rags into the overflow holes and fill the sink with water. The next thing you need to do is to prepare the plunger for which you will need petroleum jelly. Apply a layer of it on the rim of the plunger. Doing this improves the grip of the plunger. Place the plunger on the drain opening and push it up and down for at least two minutes. Immediately after removing the plunger, run hot water through it. If the water is still taking time to drain out, repeat the plunging procedure. Once unclogged run hot water continuously to remove any residue that is left.

Step 3: Cleaning the Trap

If plunging does not work for you, the next step is the removal and cleaning of the trap. To reduce the mess, it is best that you place a bucket under the sink. Look for a hexagonally shaped plug, located in the base of the bend. Once located, pull it off and use a straightened rod to run into the drain. In case you are unable to locate the plug, you may remove the trap by loosening the two couplings holding it. Thoroughly rinse the trap after removing it. Place the trap back to its position and run hot and soapy water through it.

Step 4: Using Bio-Clean

After unclogging the drain, you may use bio-clean to prevent clogged drains in the future. Instead of using harsh chemicals like Drano, using bio-clean is the right option. Make application of bio-clean to the drains in your home a regular practice. It is a perfect way to eliminate all organic buildup in the pipes. It is best if you keep a set of bio-clean in your homes.

When all else fails, you may need to call a licensed plumber in Henderson, NV.  They may recommend hydrojetting or sewer camera inspection services if the clog cannot be cleared.