Signs of Leakage
One of the most common plumbing issues is leakage. It not only wastes water, but it can end up as a costly plumbing issue if not addressed on time. Go around the house, look for signs of active leaks in the toilets, sinks, and water sprinkler in the garden. The signs of water leaks include a build-up of mould and mildew, water puddles, and moisture.
Corroded plumbing pipes is an indication that the life of pipes has ended. Corroded pipes break very easily and might even affect the quality of water in your home. Therefore, when inspecting your plumbing system maintenance, look for any corroded pipes or faucets.
Water pressure is another important factor that needs your attention when inspecting a house for a plumbing problem. For residential property, the ideal water pressure in Las Vegas should be between 55 psi to 75 psi. Very low pressure is a problem for home, and high pressure may damage the plumbing pipes. Therefore, checking the water pressure at homes is one of the most important steps when inspecting a home for plumbing issues.
Valves in the Plumbing System
The safety and shutoff valves play an essential part of a plumbing system. In the case of leakages or bursting of plumbing lines, you can save water and significantly reduce the damage through these valves. Make sure that all the valves in your home’s plumbing system are functioning perfectly and are in good condition.
Main Water Shut Off
if you need a leak detection in henderson, call Innovative Plumbing Pros LLC for the best plumbers in Henderson
Everyone should know where the emergency shut off is located in their home and how to use it. If an urgent flooding situations occurs, knowing how to shut off the water to the home quickly will save in costly property damages. In addition to knowing where the shut off is located, it is important to assure that it functions properly. Checking the shut off valve for corrosion and workability is important to save on expensive repairs that would be needed from water damages due to major flooding.
*Tip – There are now innovative new smart leak detection devices that can be installed to help detect water leaks and shut off the water to the property via smart phone
The Water Heater
When inspecting the plumbing system at your homes, make sure you do not miss out on the water heaters. Check the pipes and the valves for corrosion and leaks. Some of the most costly plumbing repairs result from failure to inspect the water heater.
*Tip – replacing the anode rod in the water heater annually will extend the life of the water heater.
Clogged drains and pipes are the worst & dealing with a situation like this can be very stressful. It is an essential element in the plumbing maintenance checklist. Observe closely any slow drains. If water is draining from the sink or a bathtub at a slow rate, the chances of residue buildup in the pipes are high. You can inspect the drains and the pipes for clogs using a camera. Hydro jetting and power-augering are two effective ways you can get an unclogged drain.
Test for Backflow
Every plumbing system, residential or commercial, consist of backflow prevention devices. Backflow problem in a plumbing system was cause leaks and might even make the water contaminated by mixing with chemicals.
Ignoring plumbing issues is not smart and though you can perform a plumbing inspection yourself, it is not always the best option. When you hire a professional plumbing company to perform monthly or annual inspections, you will likely have a more thorough idea of any plumbing related issues.