Leak Detection Materials needed:

• Water meter
• Screwdriver
• Water shutoff valve

Steps to locate your leak:

Turn off all the water in the house, including faucets, washing machines, and dishwashers. Make sure no one uses water during the leak detection process.

• Locate the water meter, usually found near the curb or sidewalk outside your home.
• Open the cover of the water meter and take note of the current reading.
• Wait for 15 minutes or more and then check the water meter again. If the reading has changed, then water is flowing somewhere in your home, indicating a possible leak.
• Turn off the main water shutoff valve, which is usually located near the water meter.
• Open all the faucets in your home to drain the water from the pipes.
• Once the water has drained, check the water meter again. If the meter reading has changed, then there is likely a leak in your main water line.
• If the meter reading hasn’t changed, then the leak is likely in your home’s plumbing system. In this case, go around your home and check for any visible signs of water damage or leaks, such as water stains, wet spots, or mold.
• If you still can’t locate the leak, you may need to use a leak detection device, which can detect the sound of water leaks behind walls or under floors.
• Once you have found the leak, you can repair it yourself or call a licensed plumber to fix it.

By following these steps, you can do a basic leak detection to identify possible leaks in your home’s plumbing system. It’s important to fix any leaks as soon as possible to prevent further damage to your home and conserve water. Call the pros at Innovative Plumbing today to send a leak detection reapair plumber your way!